Spc Flooring Tiles Woode Color Easy Maintenance Vinyl Plank Indoor

SPC floor (rigid core LVP) is the upgrade and improvement of conventional luxury ethylene tiles (LVT). The main content of SPC is natural lime and stone powder, polyvinyl chloride and stabilizer. Through a certain proportion, we can provide us with very stable stability Composite materials.

Production Process

Precautions Before Installation

· SPC floor should be leveled and placed on site with constant temperature and stability for 24 hours before installation;

· Make sure the floor is smooth and clean before installing the floor, without any residue;

· When installing the floor, the indoor temperature should be kept between 15 and 28 degrees Celsius.Indoor temperature and surface temperature 15 are appropriate, and should not be applied below 5 and above 30. The relative air humidity suitable for construction should be between 20% and 75%.

· The moisture content of the base layer should be less than 3%. The strength of the base layer should not be lower than the requirement of concrete strength C-20, otherwise suitable self-lev-eling should be used to strengthen the strength. The surface hardness of the base layer is not less than 1.2 MPa.

1. Before installation, it is recommended to spread floor film, which can make better feeling of feet and prevent the noise generated between the ground and the floor by small grains of sand. Put the first floor from the left corner of the room.

2. To prevent the natural expansion of the floor, 0.4 cm gap should be reserved between the wall and the floor.

3. When installing the first and second floor, insert the convex damage of the short side into the groove of the first floor,Continue to use the above method to install other floors...

4. When installing the last piece of the first row, you need to take the remaining part of the floor measure-ment first, and note that the floor needs to be measured in reverse.

5. Finally, use the art knife to force the floor surface, break it by hands easily, then install the last floor of the first row.

6. Start installing the second row,When installing the second floor, insert the convex of the short side into the groove of the previous floor, and gently insert the convex of the long side into the corresponding floor groove.

7. Use a rubber hammer when there are gaps.

8. Recommended installation method reference picture.

9. Finally, the same method can be used to install other floors in the room to ensure that necessary expansion gaps are left between all fixed vertical planes in the room, including doors, walls, cabinets and other fixed objects.

The Advantage Of SPC Floor

About us

As an up-rising star of SPC flooring producer & supplier, Hebei UTOP Technologies Co.,Ltd. is a professional vinyl flooring manufacturer integrating production, research and sales. We are one of the first batch of manufacturer to introduce international advanced SPC production lines.

We have 8 production lines including extrusion lines, UV coating lines, cutting lines,slotting lines, padding lines and packing lines to cover the whole business chain from the beginning to the end. In addition, we have over 200 skillful workers that can run machines smoothly and produce 20,000 square meters per day.

We are keen to developing and researching advanced technologies and lunching new products to follow market and industry trends and satisfy more customers' demands.Our products are exported to more than 50 countries and regions, for example,United States, Canada, Australia, Peru, Germany, Malaysia, Vietnam, Thailand, Greece,Colombia, Kenya and India. Welcome to visit us!

A letter from the founder of UTOP -- Aaron Wang

Hi friend, nice to meet you on Google.

I am Aaron Wang, the general manager of Hebei UTOP Technologies Co., Ltd., it nearly two decades that I engaged in the flooring industry.

Since graduated from university in the year 2003, I worked for a flooring distributing company, position from a salesman to sales director. Along with my career, various types of flooring that I studied, such as the wood parquet, bamboo flooring, laminate flooring, etc. High-quality flooring always at its high level price, while cheaper flooring, besides the inferior quality, the serious problem is the harm it takes, for example, formaldehyde, which can cause cancer. Whether there is a cheaper and easy install, of course, the healthy flooring? This is what happened to me next, I step into the SPC flooring field, it makes me exciting.

The main components of SPC flooring are virgin PVC and natural limestone powder, therefore, SPC flooring is non-toxic and formaldehyde free. SPC vinyl layers are completely waterproof, therefore, this flooring has excellent waterproof and dampproof performances. The special method of installation, safe and fast, easy to maintenance. Via this hole, seems I saw the whole world.

After full consideration, I established Hebei UTOP Technologies Co., Ltd in 2017, my vision is introducing SPC flooring to the world. Five years' development, I have two factories, overall floorage about 30,000 square meters. We have 8 SPC flooring production lines and over 200 skillful workers that can make 20,000 square meters per day.

Afterward, we purchased LVT flooring production line and wall panel production line, supply for distributors and wholesalers around the world.

We are keen to developing and researching advanced technologies and products to meet the market as well as industry trends and satisfy more customers' demands. Our products are exported to more than 50 countries and regions and still increasing, for example, United States, Canada, Australia, Peru, Germany, Malaysia, Vietnam, Thailand, Greece, Colombia, Kenya and India.

Now we have introduced fully automatic production lines to monitor and control our production process and improve our production efficiency. All our SPC flooring products are CE certified to ensure all products you buy from UTOP are quality assured.

Looking forward to your contact.